Integra DPS-6.5 Connecting to an AV Receiver, Connecting the Digital Output, Before connecting

Connecting the DPS-6.5—Continued

Connecting to an AV Receiver

You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital out- puts. In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs. You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player.

Before connecting

•When you connect the DPS-6.5 to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged.

•Connect the plugs securely.

To enjoy surround sound you need to connect this player to an AV receiver using a digital output. This player has both coaxial and optical digital jacks; use whichever is convenient.

To record the audio from a CD-R disc etc. to a cassette or CDR recorder that’s connected to the AV receiver, and when your AV receiver has Zone2, you must connect the DPS-6.5’s analog audio outputs to the AV receiver.

You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection).

Connecting the Digital Output

This player has both optical and coaxial-type digital audio outputs for connection to an AV receiver. Connect whichever is convenient.

In addition to a digital connection, we recommend also connecting using the stereo analog connection. Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out set- tings on page 43 and refer to the operating instructions that came with your AV receiver.

1.Connect one of DIGITAL AUDIO OUTPUT jacks on this player to a digital input on your AV receiver.

DIGITAL

FRONT/D. MIX		AUDIO OUTPUT		DIGITAL	COAXIAL					VIDEO OUTPUT
1	2	SURR	CENTER	COAXIAL							VIDEO
L							COMPONENT 2			COMPONENT 1
					SUPER AUDIO CD & DVD AUDIO/	Y	PB	PR	Y	PB	PR
					VIDEO PLAYER

	MODEL NO. DPS-6.5
R	RATING:	60Hz	11W
	AC 120V
SUB	OPTICAL		S VIDEO
WOOFER

OPTICAL

OPTICAL COAXIAL

Connect one or the other

AV receiver

This enables you to listen to surround sound.

For an optical connection, use an optical cable (not sup- plied) to connect the “OPTICAL DIGITAL AUDIO OUTPUT” jack to an optical input on your AV receiver. For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the “COAXIAL DIGITAL AUDIO OUTPUT” jack to a coaxial input on your AV receiver.

Connecting the Analog Output

1.Connect the FRONT/D.MIX 1 or 2 AUDIO OUT- PUT and VIDEO OUTPUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

AV receiver

DVD

IN

VIDEO

FRONT/D. MIX

FRONT 1 2

L

R

AUDIO OUTPUT

FRONT/D. MIX				DIGITAL	VIDEO
1	2	SURR	CENTER	COAXIAL

L		Y
R
SUB	OPTICAL	S VIDEO
WOOFER

The diagram shows standard video connections, but you can alternatively use the S Video or component video connections if they’re available.

2.Connect the AV receiver’s video output to a video input on your TV.

You can use the S Video or component video jacks to connect to the AV receiver if you prefer.

Tip:

•You usually have to connect the same kind of video cable between your DPS-6.5 and AV receiver, and between your AV receiver and TV.

20