Using a Macro function

1, 3 1

HOME THEATER CONTROLLER

RC-424M

Tip:

The codes programmed into a MACRO but- ton will be transmitted with an interval of 0.5 seconds. However, some devices may not be able to complete one operation in 0.5 sec- onds and may miss the next code. In this case, press one operation button, press the corresponding MODE button, then press another operation button to extend the inter- val between the two operations up to one second.

Programming Macro Direct

A series of remote controller button operations can be memorized into the MACRO DIRECT button for one- touch control.

Note:

You can program only one series of button operations into the MACRO DIRECT button.

1.Press and hold down any one of the eight MODE but- tons and press the MACRO DIRECT button. Then, release the buttons.

When you press the MODE button, the SEND/LEARN indicator lights up. When you press the MACRO DIRECT button, the indicator turns off. When you release the buttons, the indicator flashes briefly, then lights up again.

2.Follow Steps 2 in the “Programming Macro Mode” on page 36.

3.Press the MACRO DIRECT button to complete the pro- cedure.

The SEND/LEARN indicator flashes twice slowly.

4.Check to see if the button has been programmed correctly.

Point the RC-424M toward the DTR-5.1 and press the MACRO DIRECT button, and make sure that the device responds as programmed.

Transmitting the codes in Macro mode takes a while. During transmission, point the remote controller toward the device to be controlled.

Note:

•You may program up to 16 button operations into the MACRO DIRECT button. If you try to program the 17th step, it will be ignored.

•If you do not press any button for more than 30 sec- onds during the procedure, the SEND/LEARN indica- tor flashes three times quickly, then the RC-424M exits Learning mode. Resume Step 1.

•If you make a mistake during programming, the SEND/LEARN indicator flashes three times quickly, then the RC-424M exits Learning mode. Resume Step 1.

•If you erase one of the operation buttons already programmed in the MACRO DIRECT button, or if you program a different code into such a button, the operation button will no longer work. In this case, pro- gram the buttons again to avoid malfunction.

37

Page 36 Page 38
Page 37
Image 37
Integra DTR-5.1 appendix Using a Macro function, Programming Macro Direct
Page 36 Page 38

DTR-5.1 specifications

The Integra DTR-5.1 is a high-performance AV receiver that caters to audiophiles and home theater enthusiasts. Known for its powerful sound and versatile features, the DTR-5.1 stands out in a crowded market of home theater equipment.

One of the main features of the Integra DTR-5.1 is its robust amplification system. With 7.1 channels of power, it delivers impressive sound clarity and depth across all audio formats. The unit is equipped with 100 watts per channel. This powerful output allows users to enjoy dynamic music and movie soundtracks with the kind of fidelity that brings an immersive experience to the living room.

The DTR-5.1 supports various surround sound formats, including Dolby Digital EX, DTS-ES, and Neo:6. Its ability to decode multi-channel audio formats provides an expansive soundstage, enveloping listeners in rich soundscapes. For those interested in music, the unit offers built-in equalization settings and multiple sound field modes, accommodating different preferences and listening environments.

In terms of connectivity, the Integra DTR-5.1 is loaded with features. It includes multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The presence of component, composite, and optical inputs ensures compatibility with older equipment, making it a versatile choice for any setup. The receiver supports video scaling, enabling upscaling of lower-resolution video sources to 1080p for improved picture quality on high-definition displays.

The DTR-5.1 features proprietary technologies that enhance its overall performance. The Wide Range Amplification Technology (WRAT) ensures low distortion at high volumes, while the Automatic Speaker Setup system simplifies the process of calibrating speaker levels and delays, ensuring optimal audio performance in any room layout.

Additionally, the Integra DTR-5.1 is built with a solid chassis that reduces interference, promoting cleaner sound. Its user-friendly interface and remote control provide straightforward operation, making it accessible for users of all experience levels.

In conclusion, the Integra DTR-5.1 combines powerful amplification, versatile connectivity, and advanced audio technologies, making it a remarkable choice for anyone looking to elevate their home entertainment system. With its capacity to deliver stunning sound quality and support for a wide range of audio formats, the DTR-5.1 is a flagship model that truly enhances the audio-visual experience.
Top Page Image Contents