Programming Using IMC (Integra Music
Preset Setup Window
■Preset Programming
Preset programming effects all zones on the
Left mouse click over “Set up preset 1” and change any
The process is the same for all other presets.
The Preset may be
The name is also added next to the “Set up preset” in the Preset Setup Window.
■Page Preset
Left click the “Force page preset” and make changes to zone settings in IMC’s main window. Click “Default” to save and exit.
If a door bell sound has been uploaded to the amplifier, then it may be optionally included in the preset by clicking the “Sound” tab. All zones will be automatically set to input S8.
Whenever a contact across the PG and 0V terminal is closed the amplifier will assume the programmed states, and if “Sound” was selected the uploaded wav file will be played in a continuous loop for the duration of the contact closure. When the contact opens the amplifier reverts to its previous settings.
■Alarm Clock Programming
An alarm clock event may be included in a preset.
In the Preset Setup window left Click a spare “Set up preset” – for this example Preset 6 is selected. Left click the “Alarm Enable” in the Schedule panel.
Select the required time and days that the Alarm is to operate and change all the required settings in IMC’s main window i.e., which zones are ON, their volume and source selection etc.
Left click the “Default” selection to save and exit.
The preset 6 command will then be invoked at 6:15 in the morning Monday - Friday.
To turn the alarm clock off select “Setup Preset 6” and in the Preset Schedule panel
26