Quick Install Guide
Unpacking
Immediately upon receiving your
1.Check website for latest firmware, and upload if not current.
2.If adding an amplifier to an exiting stack or combin- ing amplifiers all firmware must be the same on all amplifiers
3.Zone setting. The units all ship with zones 1,2,3,4 already setup.
To add additional amplifiers to a stack the zones must be changed on the additional amplifiers. If there are zone duplications in a stack of amplifiers the zones with the same number will exactly mirror each other’s operation.
To change an amplifier zone follow the following steps.
•Do not connect the expansion bus cable.
•From the front facia rotate the Knob to select the appropriate amplifier – turn it on, and then select the “More” menu (right arrow). Scroll through the menu and select “Set Zone” and change to the required assignment pushing the Knob to set.
4.Wire the keypads to the rear of the amplifier.
5.To setup the keypad follow the Controllers instruc- tion manual, Briefly:
•with a zone, press the SET key (behind the cover plate) followed by the S2 key.
•Turn the required amplifier zone ON and OFF twice. The Keypad beeps signalling it has been successfully zoned. The Keypad now controls that zone.
•Learn codes into the Keypad by first selecting the source button ie S3. Press the SET key followed by the S1 key to enter keypad IR learning mode.
•Press the button you want to learn an IR code into.
•Align the remote with the front lower window and press the button on the remote to donate the IR code to that button. Continue learning codes for that source.
•Press the SET key to exit learn mode.
•Select the next source, ie S2. Then press SET followed by S1 and repeat the learning process.
6.To prevent a user from changing the
7.To unlock the
Table of Contents |
|
Important Safety Instructions | 2 |
Quick Install Guide | 3 |
Supplied Accessories | 3 |
Precautions | 4 |
Features | 5 |
Part Names and Functions | 7 |
Typical System Configuration | 9 |
Controller Termination | 11 |
Advanced IR Control | 12 |
Multiple | 13 |
Zone Linking | 14 |
Automation | 15 |
RS232 Protocol | 16 |
Menu Navigation | 20 |
Programming Using IMC (Integra Music Center) | 22 |
Specifications | 28 |
Supplied Accessories
Make sure you have the following accessories:
AC Power Cable
*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.
3