3.4.1.1System Memory

Intel® 945GME Express Chipset—Theory of Operation

3.4.1.1System Memory

The evaluation board supports DDR2 400/533/667 main memory. Two 200-pin SODIMM connectors (one per channel) on the board support unbuffered, non-ECC, single and double-sided DDR2 400/533/667 MHz SODIMMs. These SODIMMs provide the ability to use up to 1 Gbit technology for a maximum of 4 GBytes system memory.

Note: Memory that utilizes 128 MBit technology is not supported on the Intel® 945GME Express Chipset.

Note: The SODIMM connectors are on the back side of the board.

Caution: Standby voltage is applied to the SODIMM sockets when the system is in the S3 state. Therefore, do not insert or remove SODIMMs unless the system is unplugged.

3.4.1.2DMI

The Intel® 945GME Express Chipset GMCH’s Direct Media Interface (DMI) provides high-speed bi-directional chip-to-chip interconnect for communication with the ICH7-M.

3.4.1.3Advanced Graphics and Display Interface

The reference board has five options for displaying video, VGA, LVDS, TVOUT, SDVO, or PCI Express* Graphics. SDVO (MEC) and PCI Express* Graphics are multiplexed on the same pins within the Intel® 945GME Express Chipset. The Intel® 945GME Express Chipset contains one SDVO/PCI Express* Graphics Slot (J6C1) for a PCI Express* compatible graphics card or an SDVO compatible graphics card, one LVDS connector (J5F1), one TVOUT connector (J2A1), and one 15-pin VGA connector (J2A2B).

3.4.2ICH7-M

The ICH7-M is a highly integrated multifunctional I/O controller hub that provides the interface to the system peripherals and integrates many of the functions needed in today’s PC platforms. The following sections describe the reference board implementation of the ICH7-M features, which are listed below:

Two PCI Express* (x1) connectors

Two PCI connectors

LPC interface

System management

ACPI* 2.0 compliant

Real Time Clock

652 mBGA package

Two SATA drive connectors

One IDE connector

Eight Universal Serial Bus (USB) 2.0 ports (five ports provided on rear-panel, three provided via headers (J6H2, J7E2)

3.4.2.1PCI Express* Slots

The reference board has two x1 PCI Express* slots for add-in cards. The PCI Express* interface is compliant to the PCI Express* Rev. 1.0a Specification.

Intel® CoreTM 2 Duo processor with the Mobile Intel® 945GME Express Chipset

 

Manual

May 2007

24

Order Number: 317443-001US

Page 24
Image 24
Intel 317443-001US 3.4.2 ICH7-M, System Memory, 3.4.1.2 DMI, Advanced Graphics and Display Interface, PCI Express* Slots