C H A P T E R 2 | Gigabit Ethernet Modules |
Symptom | Possible Cause Course of Action |
Link LED is not lit. Dirty optics.
Bad cable or incorrect cable adapter orientation.
Try different ports and reverse the cable (if possible). Replace the cable. If replacing the cable fails to help, clean the optics.
| Change auto- | |
| mode does not agree | negotiation mode for |
| with remote link | either link partner so |
| partner. | that they agree. |
|
|
|
Active Link, cannot | Management | Use ifconfig |
communicate with | interface not IP | command, BOOTP |
other stations from | configured. | or RARP to |
the user console. |
| configure sw1 |
|
| interface. |
|
|
|
Active Link, cannot | Invalid VLAN | Verify the VLAN |
communicate with | configuration. | configuration. |
station on a non- |
|
|
Gigabit Ethernet port |
|
|
from a station on a |
|
|
Gigabit Ethernet port. |
|
|
|
|
|
15