BIOS SETUP
USB Controller
The options for this field are Enabled and Disabled. By default, this field is set to Enabled.
USB 2.0 Controller
The options for this field are Enabled and Disabled. By default, this field is set to Enabled. In order to use USB 2.0, necessary OS drivers must be installed first. Please update your system to Windows 2000 SP4 or
Windows XP SP1.
USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field is set to Disabled.
USB Mouse Support
The options for this field are Enabled and Disabled. By default, this field is set to Disabled.
AC97 Audio
The default setting of the AC97 Audio is Auto.
Init Display First
The default setting is PCI Card. This determines which VGA controller is initialized when the system boots.
Integrated LAN
The default setting of the LAN controller is Enabled.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the motherboard and you wish to use it. If you install an
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are: |
| |
Serial Port 1 | 3F8/IRQ4 |
|
Serial Port 2 | 2F8/IRQ3 |
|
Serial Port 3 | 3E8/IRQ10 |
|
Serial Port 4 | 2E8/IRQ11 |
|
Parallel Port | 378H/IRQ7 |
|
|
|
|
|
|
|
| 47 | |
