Installing and Replacing Desktop Board Components
Connecting Power Supply Cables
Figure 23 shows the location of the power connectors.
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (Figure 23, A) power connector to the Desktop Board may result in damage to the board or the system may not function properly.
The 2 x 12 pin main power connector (Figure 23, B) is backwards compatible with ATX12V power supplies with 2 x 10 connectors.
Figure 23. Connecting Power Supply Cables
1.Observe the precautions in "Before You Begin" on page 31.
2.Connect the 12 V processor core voltage power supply cable to the 2 x 4 pin connector (Figure 23, A).
3.Connect the main power supply cable to the 2 x 12 pin connector (Figure 23, B).
53
