Intel Desktop Boards D865GBF/D865GLC Product Guide
RJ-45 LAN Connector LEDs
Two LEDs are built into the
Table 6.
LED Color
Green
Yellow
LED State
Off
On
Off
On (steady state)
On (brighter and pulsing)
Indicates
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
LAN link is not established.
LAN link is established.
The computer is communicating with another computer on the LAN.
Table 7 describes the LED states when the board is powered up and the 10/100/1000 Gigabit Ethernet LAN subsystem is operating.
Table 7.
LED Color
Green
LED State
Off
Green
Yellow
Off
On (steady state)
On (brighter and pulsing)
Indicates
10 Mbit/sec data rate is selected.
100 Mbit/sec data rate is selected.
1 Gbit/sec data rate is selected.
LAN link is not established.
LAN link is established.
The computer is communicating with another computer on the LAN.
Hi-Speed USB 2.0 Support
NOTE
Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a
The desktop board supports up to eight USB 2.0 ports via ICH5; four ports routed to the back panel and four routed to the internal USB 2.0 headers. USB 2.0 ports are backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. Disabling
NOTE
USB devices are limited to USB 1.1 transfer rates prior to operating system and driver initialization.
18