Updating the BIOS

Recovering the BIOS

It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails. The following procedure uses recovery mode for the Setup program. See page 44 for more information on Setup modes.

NOTE

Because of the small amount of code available in the boot block area, there is no video support. You will not see anything on the screen during this procedure. Monitor the procedure by listening to the speaker and looking at the diskette drive LED.

1.Turn off the computer, disconnect the computer’s power cord, and disconnect all external peripherals.

2.Remove the computer cover and locate the configuration jumper block (see Figure 16).

3.Remove the jumper from all pins as shown below to set recovery mode for Setup.

1

3

4.Insert the bootable BIOS update diskette into diskette drive A.

5.Replace the computer cover, connect the power cord, turn on the computer, and allow it to boot. The recovery process will take a few minutes.

6.Listen to the speaker:

Upon applying power, drive A will begin to show activity. In about a minute, two beeps are heard and drive A activity ceases (temporarily) indicating the successful recovery of the BIOS core. Drive A activity will begin again followed by two more beeps indicating the successful recovery of the boot block. This sequence of events indicates a successful BIOS recovery.

A series of continuous beeps indicates a failed BIOS recovery.

7.If recovery fails, return to step 1 and repeat the recovery process.

8.If recovery is successful, turn off the computer, and disconnect its power cord.

9.Remove the computer cover and continue with the following steps.

10.On the jumper block, reinstall the jumper back on pins 1-2 as shown below to set normal mode for Setup.

1

3

11.Leave the update diskette in drive A, replace the computer cover, and connect the computer’s power cord.

12.Turn on the computer and continue with the BIOS update.

51

Page 51
Image 51
Intel D865GBF, D865GLC manual Recovering the Bios, Updating the Bios

D865GBF, D865GLC specifications

The Intel D865GBF and D865GLC are both motherboards that cater to the needs of desktop computing, featuring Intel's 865G chipset designed to support a range of processors and peripherals. These motherboards are particularly recognized for their integrated graphics capabilities and robust feature set, making them suitable for both general computing and light multimedia tasks.

One prominent feature of the Intel D865GBF is its support for the Intel Pentium 4 processors, with a front-side bus speed of up to 800 MHz. It supports Socket 478, ensuring compatibility with various Pentium 4 models. In essence, users have the flexibility to upgrade their systems easily, based on their processing requirements. The D865GBF also supports Hyper-Threading technology, enhancing overall multitasking performance by allowing better utilization of CPU resources.

The D865GLC model, while similar, comes with integrated graphics through the Intel Graphics Media Accelerator 900. This integrated solution is designed to meet the needs of users who require basic graphical capabilities without the necessity for a dedicated graphics card. With support for DirectX 9, the D865GLC can handle light gaming and streaming efficiently. Both models also feature Dual Channel DDR SDRAM memory support, accommodating up to 4GB of RAM. This memory configuration helps enhance performance by providing greater bandwidth.

In terms of connectivity, both motherboards offer a variety of options. They feature six USB 2.0 ports, allowing users to connect multiple peripherals effortlessly. Additionally, the boards come equipped with an integrated 10/100 Ethernet LAN controller for networking capabilities. The IDE and SATA interfaces offer flexibility for connecting storage devices, ensuring fast data transfer rates.

Moreover, the Intel D865 series includes advanced technologies such as Intel’s Matrix Storage Technology, which helps manage multiple storage configurations, ensuring data redundancy and improved performance. Both motherboards are also equipped with a robust array of port options, including audio, and support for legacy devices through parallel and serial ports.

Power management features are integral to the D865GBF and D865GLC, offering Energy Star compliance. This means that they are designed to provide efficient energy use, which is essential in today's environmentally conscious climate. Overall, the Intel D865GBF and D865GLC motherboards serve as solid platforms for users with varying requirements, emphasizing versatility, upgradeability, and balanced performance in the desktop computing space.