Intel D865GLC Setting the BIOS Configuration Jumper Block, Jumper Setting, Mode, Description

Intel Desktop Boards D865GBF/D865GLC Product Guide

Setting the BIOS Configuration Jumper Block

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

The location of the desktop board’s BIOS configuration jumper is shown in Figure 16.

13

J9J4

OM15233

Figure 16. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 11 shows the jumper settings for the Setup program modes.

Table 11. Jumper Settings for the BIOS Setup Program Modes (J9J4)

Jumper Setting

1	3
1	3
1	3

Mode

Normal (default) (1-2)

Configure (2-3)

Recovery (None)

Description

The BIOS uses the current configuration and passwords for booting.

After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords.

The BIOS recovers data from a recovery diskette in the event of a failed BIOS update.

44