Intel D945GCLF manual Removing the Battery

Intel Desktop Board D945GCLF Product Guide

To replace the battery, follow these steps:

1.Observe the precautions in "Before You Begin" (see page 21).

2.Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter).

3.Remove the computer cover.

4.Locate the battery on the board (see Figure 15).

5.Push the battery retention clip aside and remove the battery from the connector as shown in Figure 15. Note the orientation of the “+” and “-” on the battery.

6.Install the new battery in the connector, making sure to orient the “+” and “-” correctly.

7.Replace the computer cover.

Figure 15. Removing the Battery

40