Disabling a port, Setting the serial port baud

Text: User-defined text set via SNMP through LANDesk Network Manager or Device View for Web. Up to 32 characters can be displayed on the LCD.

Address: The current IP address of the Management Module.

4Choose Yes if you want the management module to sleep now or No to return to the Config menu. Press

Disabling a port

1From the Config menu, select Ports. Press

2Use the arrow keys to select the hub (from 1 to 8). Press

3Use the arrow keys to select the port number (from 1 to 12 or

1to 24). Press

4Select Enable or Disable using the arrow keys. Press

5Press any key to return to the Config menu.

1From the Config menu, select RS232. Press

2Use the arrow keys to change the baud (9600, 19200, or 38400).

Press to set.

3Press any key to return to the Config menu.

1From the Main menu, select Traps. Press

2Use the right arrow key to view the traps.

3At the end of the list choose whether you want to clear the trap

list. Use the arrow keys to select Yes or No and press .

For a list of supported traps, see page 25.

1From the Main menu, select About. Press

2Use the arrow keys to view the IP address, Subnet mask, MAC address, Version (software version of Management Module), and RS232 baud.