Manuals / Intel / Computer Equipment / Switch

Intel EE110MM LCD menu tree, Stats, Config, Traps, About, Help, Select stat type Domain Port

Models: EE110MM

1 61

Download 61 pages 22.69 Kb

Page 9

LCD menu tree

LCD menu tree

Stats

Select stat type:

Domain Port

Collisions & usage per second

Select hub&port hub=1 port=1

Packets (p. 32)

Collisions (p. 32)

Auto-partitions (p. 35)

Alignment errors (p. 34)

Frames too long (p. 34)

Runts (p. 35)

Very long events (p. 35)

Rate mismatches (p. 35)

Late collisions (p. 35)

FCS errors (p. 34)

Short events (p. 34)

Config

Set IP address

Manual

BootP

Sleep

Select wait time

# minutes

Ports

Select hub&port hub=1 port=1

RS232

Select baud rate: 9600 19200 38400

IP address: 000.000.000.000

Subnet Mask: 000.000.000.000

Default Gateway: 000.000.000.000

Show on sleep: Usage (p. 29) Traps (p. 25) Name (p. 17) Loc. (p. 17)

Contact (p. 17) Text (p. 12) Address (p. 19)

Select state: enable disable

Traps

History of

SNMP traps

Clear Trap List?

Yes No

About

IP Addr=

Subnet=

MAC Addr=

Version=

RS232=

Help

Press Stats to view domain or port statistics.

Press Traps to view SNMP trap messages.

Press Config to set IP info, sleep mode, or port state.

Press About to view IP & MAC addresses or firmware version

8

Image 9

Intel EE110MM manual LCD menu tree, Stats, Config, Traps, About, Help, Select stat type Domain Port, RS232

Contents

Intel Express 10/100 Stackable Hub Management ModuleUser Guide July First edition669884-001 This guide covers the following productTurn on the power after installing Quick StartUsing the LCD ContentsUsing the Console Manager ChapterIndex Technical InformationContacting Intel Customer Support Inside back coverManagement Overview of HubHub numbering Managing multiple hubsMIB identification Collision domain assignments100Mbps 100Mbps 10Mbps 10MbpsSet IP address Manual BootP Sleep ConfigLCD menu tree StatsReset button. See page 2 Using the LCDNavigating Esc - use to go back a levelViewing statistics Changing the LCD contrastDomain PortSetting the sleep mode Changing the IP configurationDisabling a port Setting the serial port baudViewing trap messages Viewing About informationAccessing with the serial port Using the Console ManagerEnter Entertelnet E Accessing with TelnetTo use Telnet EnterNavigating Toggling between insert and overstrike modeTo return to the Top screen at any time, press cT Top screen mainTop screen 1. System Configuration System Configuration screenLocation Usesin the stack has no effect on hub numbering Hub 1 of Hub 2 of Hub 3 of Hub 4 ofTop screen Local IP Configuration screenLocation UsesIP address: The unique user-assignednetwork address for the Management Module Location Remote IP Configuration screenUses Top screen•Press <CANCEL> to return to the previous menu 1.System Configuration <SNMP configuration> SNMP Configuration screenLocation Uses<Define trap receiving stations> Trap Receiving Stations screen1.System configuration <SNMP configuration> LocationSupported traps include Top screen 2. Port configuration Port Configuration screenLocation UsesOK: The port is functioning normally Top screen 3. Collision domain statistics Collision Domain Statistics screenLocation Uses10Mbps 10Mbps 100Mbps 100Mbps100Mbps collision domain 10Mbps collision domainFrames too long: The number of frames detected that exceed the maximum permitted frame size of 1518 octets Location Port Statistics screen trafficUses Top screenStatistic: Use ASor zto select the type of port statistics you want to view. Errors is the other type of statistic option you can view. See page 4.Port statistics Statistic: errors Port Statistics screen errorsLocation UsesStatistic: Use ASor zto select the type of port statistics to view. Traffic is the other type of statistic option you can view see page Late events: The number of collisions detected after the allowable detection period. Usually indicates a network topology problem, such as daisy-chainingtwo Express hubs running at 100 Mbps with UTP cable instead of Intel Cascade Cables in a stack, daisy-chainingtoo many hubs running at 10 Mbps, or using cables longer than 100 meters Top screen 5. Network health checks Network Health Checks screenLocation UsesLocation Wrong Speed Device screenUses Top screenPage <Check for wrong polarity cabling to devices> Wrong Polarity Cabling screenLocation UsesPage Location Top Traffic Generators screenUses Top screenUpdate interval: Selects the time period between updates. For example, an Update interval of 5 sec. means the Console Manager checks the Management Module every five seconds for the list of devices that are generating the most traffic Location Utilization and Collision History screenUses Top screenInterpreting this screen Top screen 6. Login, security, and reset options Login, Security & Reset Options screenLocation UsesReset Front panel reset buttonTop screen 7. About About screenLocation UsesProduct name: Displays the type of device the Management Module is supporting Top screen 8. Logout Logout screenLocation UsesDefaults Technical InformationLocating MIB files Console Manager Limited Hardware Warranty Returning a Defective Product RMALIMITATION OF LIABILITY AND REMEDIES Federal Communications Commission FCC Statement Manufacturer DeclarationAVERTISSEMENT WARNUNG AVVERTENZAADVERTENCIAS I Index Page Page Page Page Software updates TroubleshootingInstallation notes How to access