Accessing with Telnet, Telnet E, To use Telnet

NOTE

Make sure you enable VT100 arrows in the Telnet applica- tion you’re using.

If you don’t, you won’t be able to use the arrow keys.

NOTE

If the screen doesn’t display cor- rectly when connecting, press q. This will refresh it.

Accessing with Telnet

Telnet lets you access the Management Module in-band (over the network).

1Make sure an IP address is assigned to the Management Module. See pages 11 or 19 for instructions.

2Open a Telnet application. In Windows 95, select Run from the Start Menu. Type:

3From the Terminal menu, select Preferences. Make sure the emulation type is VT-100/ANSI and VT100 Arrows are enabled.

4From the Connect menu, select Remote System. Enter the IP address of the Management Module and click Connect.

5Log into the Console Manager:

Enter	username:	[	]
Enter	password:	[	]

By default, no password or username is assigned. See page 45 to assign them.