3
NOTE
Make sure VT100 arrows are enabled in your terminal emula- tion program.
NOTE
If you’re running Windows 95 or NT*, make sure the scroll lock is off on your keyboard.
Using the Console Manager
Accessing with the serial port
1Use the enclosed null modem cable to connect the serial port of your PC to the serial port of the Management Module.
2Open a terminal emulation program (such as HyperTerminal in Microsoft Windows* 95). Use these communication parameters:
•9600 baud
•8 data bits
•No parity
•1 stop bit
•No flow control
3Log into the Console Manager:
Enter | username: | [ | ] |
Enter | password: | [ | ] |
By default, no password or username is assigned. See page 45 to assign them.
13
