Installation
3-4 Expansion Slots
AGP Slot
The mainboard is equipped with an AGP slot. Make sure you install a card that supports the 1.5V specification.
AGP Slot |
PCI Slots |
PCI Slots
The mainboard is equipped with 5 PCI slots. It supports PCI cards that comply with the PCI specification.
Installing an Expansion Card
The steps below assume that the mainboard is already installed in the system chassis.
1.Make sure the PC and all other peripheral devices connected to its has been powered down.
2.Disconnect all power cords and cables.
3.Remove the system unit cover.
4.Remove the bracket of the slot that you intend to use. (You need to remove the screw in order to remove the bracket.)
5.Align the card above the slot then press it down firmly until it is completely seated in the slot.
6.Secure the card to the chassis with the screw you removed in step 4.
7.Replace the system unit cover.
8.Power on the PC.
9.Enter the BIOS step program to make the necessary settings.
10.Save the settings and restart the PC.
11.Install the software drivers of the expansion cards, if necessary.
Page
