Intel FSB800 / DDR400 (PC3200), FSB533 CFP: Front Panel Connector, Cfp / Cir / Cspk, Installation

Installation

CFP: Front Panel Connector

" HD_LED

This will light when the hard drive is being accessed.

" PWR_LED

This connects to the power button of the system chassis

" RST

This switch allows you to reboot without having to power off the system thus prolonginh the life of the power supply or system.

CFP / CIR / CSPK

"PW_ON

This is connected to the power button on the case. Using the Soft-Off by Pwr-BTTN feature, you can choose either Instant Off (turns system off immediately), or 4 sec delay (push the button for 4 seconds before the system turns off). When the system is in 4 sec delay mode, suspend mode is enabled by pushing the button momentarily.

CIR: IR connector

Connect your IrDA cable to the IR connector.

1.VCC	4.GND
2. NC	5.IRTX
3.IRRX

CSPK: Speaker

Connect to the system’s speaker for beeping

1.VCC	3.GND
2. NC	4. Speaker

Page 3-17