Hardware Installation- 21 -
English
14) SAFE_MODE
When this jumper is set to Safe Mode, system will enter BIOS Setup directly at bootup. At this
mode, the Supervisor/User Password previously configured will be cleaned.
If the BIOS file on the motherboard is damaged, set this jumper to Recovery mode. Insert the floppy
disk containing the complete BIOS file and then restart the system. System will write the BIOS file
to the BIOS ROM automatically at startup.
1-2 short: Normal (Default)
1
2-3 short: Safe Mode
1
Open: Recovery
1
15) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin.
1-2 short: Clear CMOS
1
2-3 short: Normal
1