Serial Port B
This allows users to configure serial prot B by using this option.
Disabled | Disable the configuration. |
Enabled | Enable the configuration (Default value) |
Base I/O Address/IRQ | |
3F8/IRQ4 | Set IO address to 3F8. |
2F8/IRQ3 | Set IO address to 2F8. (Default value) |
3E8/IRQ4 | Set IO address to 3E8. |
2E8/IRQ3 | Set IO address to 2E8. |
Floppy disk controller
Enabled | Enable the floppy disk controller. (Default value) |
Disabled | Disable the device. |
Floppy Check
Enabled | Enable the device to verify floppy typer when system boot. |
Disabled | Disable the this function. (Default value) |
Parallel ATA
Disabled | Disable the device. |
Both | Select both Channel 0 and Channel 1 as Parallel ATA. |
| (Default value) |
Channel 0 | Select both Channel 0 as Parallel ATA. |
Channel1 | Select both Channel 1 as Parallel ATA. |
4 2
