Intel GS-SR195V manual Peripheral Configuration, Serial Port A

BIOS Setup

Peripheral Configuration

	PhoenixBIOS Setup Utility
Peripheral Configuration		Item Specific Help
Serial Port A	[Enabled]
Base I/O address/IRQ	[3F8/IRQ4]
Serial Port B	[Enabled]
Base I/O address/IRQ	[2F8/IRQ3]
Floppy disk controller	[Enabled]
Floppy Check	[Enabled]
Parallel ATA	[Both]
Serial ATA	[Enabled]
Native Mode Operation	[Auto]

F1: Help	KL: Select Item	+ -: Change Values	F5: Setup Defaults
Esc: Exit	IJ: Select Menu	Enter: Select Sub-Menu F10: Save&Exit

Figure 2-4: Peripheral Configuration

Serial Port A

This allows users to configure serial prot A by using this option.

Disabled	Disable the configuration.
Enabled	Enable the configuration (Default value)
Base I/O Address/IRQ
3F8/IRQ4	Set IO address to 3F8.	(Default value)
2F8/IRQ3	Set IO address to 2F8.
3E8/IRQ4	Set IO address to 3E8.
2E8/IRQ3	Set IO address to 2E8.

4 1