BIOS Setup
Serial ATA
Enabled | Enable Serial ATA device. (Default value) |
Disabled | Disable the Serial ATA. |
NativeModeOperation
This option allows user to set the native mode for ATA function.
Note that certain OS is not supported under Native Mode.
Auto | Auto detected. (Default value) |
Serial ATA | Set Native mode to Serial ATA. |
Parallel ATA | Set Native mode to Parallel ATA. |
Reset ConfigurationData
Yes | Clear the Extended System Configuration Data (ESCD) area. |
No | Disable this function. (default value) |
Clk Gen Spread Spectrum
Enabled | Enable ClkGen Spread Spectrum. |
Disabled | Disabled this function. (Default value) |
System After AC Back
Set the mode od operation if an AC/Power loss occurs.
Power On | Power on system without pressing power button. |
Stay Off | Keep the power off until the power button is pressed. |
Pre- State | Set system to the last sate when AC power is removed. Do not power on |
| system when AC power is back. (Default value) |
4 3