Intel IMB200VGE user manual Onboard Device, On-Chip Serial ATA

IMB200 LGA775 ATX MB User Manual

This option could allow you to set up Master IDE interface from PIO mode0 to PIO Mode 4

zIDE Primary Slave PIO

This option could allow you to set up Slave IDE interface from PIO mode 0 to PIO Mode 4

zIDE Primary Master UDMA

This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary Master

zIDE Primary Slave UDMA

This option could allow you to enabled or disabled onboard Ultra DMA mode on Primary Slave

zOn-Chip Serial ATA

This option could allow you to enabled or disabled onboard SATA port function

Combined Mode: This option allows you to use both

IDE and SATA drive; allowing a maximum on 4 drives-1 IDE Master; 1 IDE Slave and 2 SATA. You must manually set the SATA and PATA drives mode in the “ PATA IDE Mode “ and “ SATA Port

“ fields.

Enhanced Mode: This option allows you to use both IDE

And SATA drives; allowing a maximum of 6 drives – 1 IDE Master, 1

IDE Slave and 4 SATA.

SATA Only This option automatically sets the SATA Drives to Primary Master Mode. Since the SATA drives are In Master mode, you can not set the IDE drive to Master Mode.

7.6.2 Onboard Device

Move the cursor to this field and press <Enter>. The following Screen will be appeared.

52 Award BIOS Utility