IMB200 LGA775 ATX MB User Manual
The choice: Half, Full.
zUR2 Duplex Mode
Half: Data is completely transmitted before receiving Data
Full: Transmits and receives data simultaneously.
zOnboard Parallel Port
378/IRQ7, 3BC/IRQ7, 278/IRQ5 Select the I/O address and IRQ for the onboard parallel port.
Disabled: Disables the onboard parallel port.
zParallel Port Mode
The options are SPP, EPP, ECP and ECP+EPP. These apply to a Standard specification and will depend on the type and speed of You device. Refer to your peripherals manual for the best option.
SPP – Allows normal speed operation but in one direction only.
ECP (Extended Capabilities Port) – Allow parallel port to operate in bidirectional mode and at a speed faster then the normal mode’s data transfer rate.
EPP (Enhanced Parallel Port) – Allows bidirectional parallel port operation at maximum speed.
zECP mode Use DMA
This is used to select a DMA channel of the parallel port.
7.6.4 Onboard UART 3/4
Use the onboard UART. In this mode you should use the Picasso SDK
Award Bios Utility | 55 |
