Evaluation Platform Board Manual 57
Intel® IQ80332 I/O Processor
Getting Started and Debugger
B.3 New Project SetupB.3.1 Creating a New Project
1. Launch Code|Lab EDE for .NET.
2. On the Start Pa ge, select “New Projec t” .
a. The “New Projects” window appears.
b. Select “Code|Lab Projects” under Project Types and name the project “Project80332” in
the name field.
Note: The directory “Project80332” is created under the path specified in the Location box.
c. Click OK.
3. In the Code|Lab EDE Project Wizard Window:
a. Select “RedHat GNU Tools for XScale” under “Build Toolset”.
b. Select 80332 under “Project Template”.
c. Select “Application” under “Project Type”.
d. Click “Finish”.
4. Close the “Start Page” by clicking on the X in the top right corner of the Start Page window.
5. The new project is now in the “Solution Explorer” window. When this window is not ope n,
open it by “View, Solut ion Explorer”.
6. Right click on “Project80332” and select “Save Project80332”.
7. From http://developer.intel.com/design/iio/swsup/Tester1LED.htm, download the following
zip file (…/Tester1LED) from the Software Supp ort sec tion, contai ning the example co de file s
to the newly created project folder:
Test er1 LE D.z ip
blink.c
blink.h
led.c
led.h
These files can be placed in any directory on the hard drive.
8. Add the newly downloaded files to the project:
a. In the “Solution Explorer” window, right click on “Project80332” and select “Add, Add
Existing Item”.
b. In the “Add Existing Item” window, use the dr op-down menu under “Look In” to find the
four files listed in step 7 on the hard drive. Select all four files and click “op en”. The
“Solution Explorer” window now shows these files under “Project80332”.