Intel MIC-3321 CPU L1 & L2 Cache, Quick Power On Self Test, WinXP with SP1 or Win 2000 with SP3

CPU L1 & L2 Cache

Enabled (default)	Enable cache
Disabled	Disable cache

Note: The internal cache is built into the processor.

Quick Power On Self Test

This category speeds up Power On Self Test (POST) after you power on the computer. If this is set to Enabled, BIOS will shorten or skip some check items during POST.

Enabled (default)	Enable quick POST
Disabled Normal	Normal POST

First/Second/Third Boot Device and Boot Other Device

The BIOS attempts to load the operating system from the devices in the

sequence selected in these items. The settings are Hard Disk, CDROM, USB-FDD, USB-ZIP, USB-CD-ROM, LAN 1, LAN 2 and Disabled.

First boot device (default)		USB-CD-ROM
Second boot device		Hard Disk
Third boot device		CD-ROM
Note:	When you boot by USB-CD-ROM, please install
	WinXP with SP1 or Win 2000 with SP3.

Boot Up NumLock Status

On (default): Keypad: numeric keys

Off:	Keypad: arrow keys
Gate A20 Options
Normal:	A20 signal is controlled by keyboard or chipset hardware.

Fast (default): A20 signal is controlled by port 92 or chipset method

MIC-3321 User Manual 22