Intel PCI Copper Cabling And Connector Info, Fiber Cable Specifications, base-SX850nm multimode

Models: PCI-X PCI

1 54
Download 54 pages 44.32 Kb
Page 26
Image 26
9.COPPER CABLING AND CONNECTOR INFO

GigMAC-PMC and PCI

 

GigPMC Switch

Board and Driver Users Manual

Step 2 – Remove the CompactPCI or Embedded Mainboard controller from the system, if necessary to access the PMC slot. This will allow the PMC adapter card to be more easily installed. Consult your User's Manual for assistance in opening and removing the mainboard. The PMC card has 3 connectors labeled JN1, JN2 and JN3. JN1 and JN2 are required for all modes of operation while JN3 is required only for 64-bit mode. Your CompactPCI mainboard or other PMC carrier will also contain PMC card connectors labeled JN1 and JN2, and optionally JN3 and JN4. JN4 is for optional user-defined I/O and is only used by the Model 5468 GigPMC switch. Additionally, the mainboard may also contain either a 5 volt or 3.3 volt key to prevent voltage mismatches. Since the PMC card may operate from a 5 or 3.3 volt supply, it can be used in either a 5 or 3.3 volt keyed system. It is very important to align the connectors before pressing the PMC card onto the mainboard to prevent damage to the card or slot.

Step 3 - Align the PMC connectors and the system motherboard Connectors and push down firmly on the PMC card until it is completely seated in the connectors on the mainboard. Once the adapter card has been successfully installed, re-install the mainboard. Re-attach the power cable and any other cables that were removed for the hardware installation procedure.

9.COPPER CABLING AND CONNECTOR INFO

9.1.FIBER CABLE SPECIFICATIONS

Distance (Model 6267-SFP, 5261-LC, 5262-LC, 5262-SC, 5263-SFP multimode/singlemode fiber)

(1000-base-SX 850nm multimode)

(1000-base-LX 1310nm singlemode)

1000BASE-SX/LX (850 nm Laser for multimode-SX, 1310nm laser for single-mode-LX)

Fiber Core Diameter

62.5/125 um 62.5/125 um 50.0/125 um 50.0/125 um 8.0/125 um

Type

 

Fiber

 

Distance

 

Bandwidth

 

 

 

Mhz* km

 

 

 

 

 

 

 

multi-mode

 

160 Mhz * km

 

2 to 220 m

 

 

 

 

 

multi-mode

 

200 Mhz * km

 

2 to 275 m

 

 

 

 

 

multi-mode

 

400 Mhz * km

 

2 to 500 m

 

 

 

 

 

multi-mode

 

500 Mhz * km

 

2 to 550 m

 

 

 

 

 

single-mode

 

500 Mhz * km

 

5-10 km

DSS NETWORKS, INC.

Version: 2.6

Page: 26

Page 26
Image 26
Intel PCI Copper Cabling And Connector Info, Fiber Cable Specifications, base-SX850nm multimode, base-LX1310nm singlemode