—

Wake-up by PCI card

Default:Disabled

—

Power On by Ring

Default: Disabled

—

Resume by Alarm

Default:Disabled

 

Date (of Month) Alarm

Default:0

—

Time (hh:mm:ss) Alarm

Default:0

 

** Reload Global Timer Events **

 

—

Primary/ Secondary IDE 0/1

Default:Disabled

—

FDD,COM,LPT Port

Default:Disabled

—

PCI PIRQ [A-D]#

Default: Disabled

5.7

Set Supervisor Password &Set User Password

If you highlight this item and press Enter, a dialog box appears that you can enter a supervisor password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password. There will be the second dialog box asking you to retype the password for confirmation. Press Enter after you have retyped it correctly. Then the password is required for the access to the setup utility or for it at start-up, depending on the setting of the password check item in advanced setup.

5.8 Save Exit & Without Save Exit Setup

Highlight this item and press Enter to save the changes that you have made in the setup utility configuration and exit the program. When the save and exit dialog box appears, press Y to save and exit, or press N to exit without saving.

14

Page 16
Image 16
Intel PM915-478, PM915P-478 manual Set Supervisor Password &Set User Password, Save Exit & Without Save Exit Setup