VBrick Systems 7000 manual Usernames & Passwords

	System Configuration
Read or Write Script	You can add scripts to the /scripts folder on the appliance via FTP
Files	by clicking on the FTP Scripts button.
User Function Script	Use this parameter to associate a user-defined and user-named .txt
1–4	script file with (F1–F4) function keys on the front panel. Simply
	press the appropriate function key to execute the script. For an
	example of a user-defined script, see Sample Script on page 17.

Usernames & Passwords

Use this page to define user names and passwords and their corresponding permissions with respect to the appliance. (Table 2 shows the default user names, passwords, and permissions.) It also lets you assign a Pin number that will allow direct access to the keypad and functions on the appliance front panel (if the appliance is configured with a front panel.

User Name	Enter desired user name. Cannot exceed 20 characters. It may include
	any combination of alphanumeric characters and only the following
	special characters: ~ ! # $ ^ * + & [ ] { } < > See Table 2 below for
	defaults.
Password	Enter password. Cannot exceed 20 characters. May include any
	combination of alphanumeric characters but only the following special
	characters: ~ ! # $ ^ * + & [ ] { } < > See Table 2 for defaults.
Confirm	Confirm new password entry. The appliance will then display a user
	message and reboot.
Pin	Default = 0000. Enter a four-digit numeric string that will allow direct
	access to the keypad and functions on the appliance front panel.
Confirm Pin	Enter the same numeric string from above to confirm.

VBrick H.264 Appliance Admin Guide 13