![](/images/new-backgrounds/1242477/24247771x1.webp)
System Configuration
Passthrough State: Responder
Passthrough State | Responder – In this case the VBrick will accept a connection request |
| (up to 64 connection requests). |
|
|
Baud Rate | Rate of Passthrough port. Rate can be set to the following (Default |
| = 9600): 110, 300, 600, 1200, 2400, 3600, 4800, 7200, 9600, 14400, |
| 19200, 28800, 38400, 57600, 115200. |
|
|
Stop Bits | Number of stop bits for Passthrough port (1 or 2). |
|
|
Parity | None, Even, Odd. |
|
|
RTS Control | Force OFF, Force ON or Automatic. If automatic, the control will be |
| on when Passthrough is active. Under no conditions are RTS or |
| DTR controls passed through |
| local. When using a VBrick |
| to Automatic; when using a VBrick |
| to Force ON. |
|
|
DTR Control | Force OFF, Force ON or Automatic. If automatic, the control will be |
| ON when Passthrough is active. Under no conditions are RTS or |
| DTR controls passed through |
| local. When using a VBrick |
| to Automatic; when using a VBrick |
| to Force ON. |
|
|
COM Interface Type | Describes the COM interface connector. |
| • RS232 – standard |
| • RS422/485 – |
|
|
VBrick H.264 Appliance Admin Guide | 27 |