VBrick Systems 7000 manual Using an EtherneTV Portal Server, enter the Portal Server IP

Program Configuration

RTCP Transmit Interval

If RTCP Transmit is enabled, this setting tells the appliance how often (in seconds) to send the reports. Default = 10 seconds.

Announce Settings

This section contains parameters that are used to modify announcements from the appliance. Announcements are advertisement packets that are transmitted by VBrick appliances to other VBrick appliances and VBrick applications such as the EtherneTV Portal Server and StreamPlayer. They are used to identify streams present in the network.

Announce	This section is used to announce the RTSP streams to the local
	network allowing viewable RTSP announcements in programs
	like StreamPlayer. The unit must be on the same segment of the
	network or the router must be configured to retransmit
	broadcast packets for the announcements to be accessible using
	the IP address 255.255.255.255.
Use Global Announce IP	Use Announce IP Address for Servers and Announce Port
and Port	defined on Program Configuration > Global page. If checked,
	the Destination and Port fields are greyed out.
Destination IP Address	The destination IP address the announcement is sent to. By
	default, the announcement is sent to the multicast network. If
	using an EtherneTV Portal Server, enter the Portal Server IP
	address.
Port	The destination port the announcement is sent to.

External Announce Settings

These settings configure an external announcement that can be used when the stream is reflected to a third-party server or a (future) VBrick reflector.

External Announce	This section is used to announce RTSP streams to a network
	device outside of the broadcast domain.
Use Global Announce IP	Use Announce IP Address for Servers and Announce Port
and Port	defined on Program Configuration > Global page. If checked,
	the Destination and Port fields are greyed out.
Destination IP Address	The destination IP Address or Host Name the announcement is
	sent to. If using an EtherneTV Portal Server, enter the Portal
	Server IP address. If using a reflector, enter the reflector server
	IP address.
Port	The destination port the announcement is sent to.
URL	The URL of the reflector (i.e the source of the reflected
	stream). This URL is embedded in the announcement.

VBrick H.264 Appliance Admin Guide 55