VBrick Systems 7000 manual Passthrough

•There is no chaining of scripts.

•Comments are not allowed on the same line as a command.

•All scripts are executed in a strictly serial manner by a single task.

•While executing a script it is possible to miss a double change of any event.

Passthrough

The TCP/IP network can serve as an intermediary between two VBrick appliances and their serial ports or between a PC application sending IP packets and an appliance's serial port. This feature supports a wide range of serial applications. Contact VBrick support for details and restrictions. End-to-end control is initiated by enabling or disabling Passthrough. For more about passthrough, and how it can be used, see the H.264 Appliance Getting Started Guide.

Passthrough State

Used to enable/disable Passthrough. You must be the Active Editor to enter a Passthrough state. Three states are possible:

•Disabled – The VBrick will neither initiate nor respond to Passthrough setup requests.

•Responder – In this case the VBrick will accept a connection request (up to 64 connection requests).

•Initiator – In this case it will continuously attempt to automatically initiate a Passthrough connection to the remote destination. This mode also offers metadata destination options.

26 © 2009 VBrick Systems, Inc.