Intel PMB-601LF Advanced Chipset Features, Chipset Features Setup Screen, Dram Timeing Selectable

Chapter 4 Award BIOS Setup

4-5. ADVANCED CHIPSET FEATURES

Choose the〝ADVANCED CHIPSET FEATURES〞from the main menu, the screen shown as below.

Phoenix - AwardBIOS CMOS Setup Utility

Advanced Chipset Features

DRAM Timing Selectable		[By SPD]	Item Help
X CAS Latency Time		Auto
X DRAM RAS# to CAS# Delay		Auto
X DRAM RAS# Precharge		Auto	Menu Level ►
X Precharge dealy (tRAS)		Auto
X System Memory Frequency		By SPD
Memory Hole At 15M-16M		[Disabled]
** VGA Setting **
PEG/Onchip VGA Control		[Auto]
On-Chip Frame Buffer Size		[8MB]
DVMT Mode		[DVMT]
DVMT/ FIXED Memory Size		[128 MB]
↑↓→←: Move Enter: Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values	F6: Fail-Safe Defaults F7:Optimized Defaults

Chipset Features Setup Screen

This parameter allows you to configure the system based on the specific features of the installed chipset. The chipset manages bus speed and access to system memory resources, such as DRAM and the external cache.

It also coordinates communications between conventional ISA bus and the PCI bus. It must be stated that these items should never need to be altered. The default settings have been chosen because they provide the best opera- ting conditions for the system. The only time you might consider making any changes would be if you discovered that data was being lost while using your system.

DRAM TIMEING SELECTABLE:

The value in this field depends on performance parameters of the installed memory chips (DRAM). Do not change the value from the factory setting unless you install new memory that has a different performance rating than the original DRAMs.

Page: 4-12 PMB-601LF USER′S MANUAL