Chapter 4 Award BIOS Setup
1.USB 1.0 CONTROLLER
This should be enabled if your system has a USB installed on the system board and you want to use it. Even when so equipped, if you add a higher performance controller, you will need to disable this feature.
2.USB 2.0 CONTROLLER Enable the USB 2.0 controller.
3.USB KEYBOARD FUNCTION
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.
4.USB MOUSE FUNCTION
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB Mouse.
5.USB STORAGE FUNCTION Enable the USB Storage Function
6.USB FLASH DISK 2.00
Select USB Flash Disk Type.
ONBOARD LAN 1/2 CONTROLLER:
Enable the LAN controller.
Page: |