Intel PRO/100 TX PCI manual Install network drivers - Windows NT Version 3.5x only

PROSet is an enhanced utility that you can use to easily configure and test your adapter in Windows NT. PROSet also displays the computer resources that were assigned to each PRO adapter installed.

5Click OK in the main PROSet window to return to Windows NT.

6The Intel adapter now appears as the “Intel 82557-based 10/100 Ethernet Adapter” on the list in the Network window. Click Close to finish.

7Restart Windows NT when prompted.

To install multiple adapters, repeat this procedure for each new adapter. See page 11 for specific information.

To run the PROSet software at any time, double-click the Intel PROSet icon in the Control Panel or click the Adapter Properties button.

Install network drivers - Windows NT Version 3.5x only.

After putting the adapter in the computer and starting Windows NT, you need to install the Intel drivers and test the adapter.

1Double-click the Network icon in the Control Panel.

2Click Add Adapter.

3When the list of adapters appears, scroll to the end of the list and select <Other> Requires disk from manufacturer.

4Insert the Intel Configuration and Drivers disk in the A: drive and click OK. Drivers and the Intel PROSet utility are installed and PROSet starts. PROSet is an enhanced utility that you can use to easily configure and test your adapter in Windows NT. PROSet also displays the computer resources that were assigned to each PRO adapter installed. The PROSet main window is shown on the preceding page.

5Click OK in the PROSet main window to return to Windows NT.

6Click OK in the Network Settings dialog box and remove the installation disk. When prompted, restart Windows NT.

To install multiple adapters, repeat this procedure for each new adapter. See page 11 for specific information.

To run the PROSet software at any time, double-click the Intel PROSet icon in the Control Panel.

7