BIOS User Interface IntelP®P Server Board S3420GP TPS
Setup Item Options Help Text Comments
Device
timeout
20 sec
30 sec
40 sec
Storag t.
Setting to a larger
storage device to be ready, if needed.
er is
Reset 10 sec USB Mass e device Start Unit command timeou
value provides more time for a mass
Grayed out if the USB Controll
disabled.
One line for each
mass storage
device in system
Auto
Floppy
Forced FDD
k
CD-ROM
[Auto] - USB devic B are emulated as
floppies.
[Forced FDD] - HD
ZIP driv
Grayed out if the USB Controller is
a
, the USB
correct
rst
Hard Dis
es less than 530 M
D formatted drive are emulated as a
FDD (e.g., e).
Hidden if no USB Mass storage
devices are installed.
disabled.
This setup screen can show
maximum of eight devices on this
screen. If more than eight devices
are installed in the system
Devices Enabled shows the
count, but only displays the fi
eight devices here.
USB 2.0
controll
USB por .
our OS v
Grayed out if the USB Controller is
er
Enabled
Disabled
Onboard
Contact y
ts are enabled to support USB 2.0 mode
endor regarding OS support of this
feature.
disabled.
.3.2.2.6 PCI Screen tions. 5The PCI Screen allows the user to configure the PCI add-in cards, onboard NIC controllers, and video opTo access this screen from the Main screen, select Advanced > PCI.
Advanced
PCI Configuration
Maximize Memory below 4GB Enabled / Disabled
Memory Mapped I/O above 4GB Enabled / Disabled
Onboard Video Enabled / Disabled
Dual Monitor Video Enabled / Disabled
Onboard NIC1 ROM Enabled / Disabled
Onboard NIC2 ROM Enabled / Disabled
Onboard NIC iSCSI ROM Enabled / Disabled
NIC 1 MAC Address <MAC #>
NIC 2 MAC Address <MAC #>
Figure 22. Setup Utility – PCI Configuration Screen Display
Revision 1.0
Intel order number E65697-003
50