Intel SC450NX Tools You Need

Specification Pedestal Mode Rack Mode

Height 48.26 cm (19 inches) 7u

Width 31.12cm (12.25 inches) 19 inch rack

Depth 63.5cm (25 inches) 25 inches

Weight 38.25 kg (85 lbs) minimum configuration

45 kg (100 lbs) maximum configuration 38.25 kg (85 lbs) minimum configuration

45 kg (100 lbs) maximum configuration

Required front

clearance 10 inches (inlet airflow <35 °C / 95 °F) 10 inches (inlet airflow <35 °C / 95 °F)

Required rear

clearance 8 inches (no airflow restriction) 8 inches (no airflow restriction)

Required side

clearance 0.0 inches (additional side clearance

required for service) N/A

Tools You Need

Contents

Main Page Page Page Safety Guidelines Server Precautions CAUTIONS Equipment Rack Precautions CAUTIONS Page Contents Safety Guidelines Introduction Configuring for Rack Mount Configuring for Pedestal Mount Page Introduction Table 1. SC450NX MP Server Physical Specifications Figure 1. Equipment Rack with Three Servers Figure 2. Single Server in Pedestal Mode Tools You Need Phillips (cross-head) screwdriver (#1 and #2 bits) Pencil Configuring for Rack Mount Prepare the Slide Assemblies Prepare the Server Attaching the Bezel Frame and Door Attach the Chassis Handles WARNING Attach the Small Bar of the Slide Assembly to the Server Prepare the Equipment Rack Attach the Right-angle Extension Brackets to the Equipment Rack / Attach the Center Bar and Large Outer Bar Assemblies to the Equipment Rack Install the Server in the Rack Page Page Configuring for Pedestal Mount Install Chassis Feet Install the Top and Side Covers Page Changing from Pedestal to Rack Prepare the Slide Assemblies Remove the Covers Exchange the Bezel Frame