Cables and Connectors |
|
|
| Intel® Server Platform SR6850HW4 TPS | |||||
|
|
|
|
|
|
|
|
| |
| 16 | LVD_RST_N | 36 | +5V | 56 | LVD_RST_P | 76 | GND |
|
|
|
|
|
|
|
|
|
|
|
| 17 | LVD_ACK_N | 37 | NC | 57 | LVD_ACK_P | 77 | SCSI_ACT |
|
|
|
|
|
|
|
|
|
|
|
| 18 | LVD_BSY_N | 38 | GND | 58 | LVD_BSY_P | 78 | NC |
|
|
|
|
|
|
|
|
|
|
|
| 19 | LVD_ATN_N | 39 | SCSI_ID (0) | 59 | LVD_ATN_P | 79 | SCSI_ID(1) |
|
|
|
|
|
|
|
|
|
|
|
| 20 | LVD_DBP_N | 40 | SCSI_ID (2) | 60 | LVD_DBP_P | 80 | SCSI_ID(3) |
|
|
|
|
|
|
|
|
|
|
|
4.2.7AC Power Input Connectors
An IEC320 15A receptacle is located on each power supply. An appropriately sized power cord and AC main power source are required. See Chapter 5 for system voltage, frequency, and current draw specifications. An external AC cord retention feature is supported by the chassis but is not supplied by Intel. Please refer to the Server Platform SR6850HW4 Power Cord Enabling Specification to assist in the procurement of power cords for the platform.
NEUTRAL LINE
GND
IEC 320 C19
Figure 20. AC Power Input Connector
4.2.83-pin Chassis Intrusion Connector
Please, see the table below for
Table 16.
PinSignal
1Intrusion event
2GND
3Intrusion button attached
4.2.912-pin Power Distribution Board Power Connector
The Server Platform SR4850HW4/SR6850HW4 Power Distribution Board has three power connectors, two for the Server Board Set SE8500HW4 Mainboard and one for the Server Platform SR6850HW4 SCSI Backplane Board.
Table 17. Power Connector Pinout
Pins Signal
42 | Revision 1.0 |
| Intel order number |