TE430VX MotherboardMotherboard Technical Product Specification
50
3.12.5.4 Num Lock
Sets the beginning state of the Num Lock feature on your keyboard. The options are On and Off.
The default is Off.
3.12.5.5 Setup Prompt
Turns on (or off) the “Press <F1> Key if you want to run Setup” prompt during the power-up
sequence. The options are Enabled and Disabled. The default is Enabled.
✏NOTE
This option has no effect on your ability to access the Setup program. It only toggles the prompt.
3.12.5.6 Typematic Rate Programming
Sets the typematic rates. The options are Default and Override. The default is Default. Choosing
Override enables Typematic Rate Delay and Typematic Rate.
3.12.5.7 Typematic Rate Delay
Sets how long it takes for the key-repeat function to start when you hold down a key on the
keyboard. The options are 250, 500, 750, and 1000 millisecond delays. The default is 250. If
Typematic Rate Programming is set to Default, this option will not be visible.
3.12.5.8 Typematic Rate
Sets the speed at which characters repeat when you hold down a key on the keyboard. The higher
the number, the faster the characters repeat. The options are 6, 8, 10, 12, 15, 20, 24, and 30
characters per second. The default is 6. If Typematic Rate Programming is set to Default, this
option will not be visible.
3.12.6 Advanced Screen
This section describes the Setup options found on the Advanced menu screen. If you select certain
options from the Advanced screen (e.g., Peripheral Configuration), the Setup program switches to a
subscreen for the selected option. Subscreens are described in the sections following the
description of the Advanced screen options.
3.12.6.1 Processor Type
Reports the CPU type. There are no options.
3.12.6.2 Processor Speed
Reports the CPU clock speed. There are no options.
3.12.6.3 Cache Size
Reports the size of the secondary cache. There are no options. If your system contains no L2
cache, this item will not appear.