TE430VX MotherboardMotherboard Technical Product Specification
56
3.12.12 Security Screen Options
3.12.12.1 User Password is
Reports if there is a User password set. There are no options.
3.12.12.2 Administrative Password is
Reports if there is an Administrative password set. There are no options.
3.12.12.3 Set User Password
Sets the User password. The password can be up to seven alphanumeric characters.
3.12.12.4 Set Administrative Password
Sets the Administrative password. The password can be up to seven alphanumeric characters.
3.12.12.5 Unattended Start
Controls when the security password is requested. The options are Enabled and Disabled. The
default is Disabled. The User password must be enabled before you can enable this option. If
Enabled is selected, the system boots, but the keyboard will be locked until the User password is
entered.
3.12.12.6 Security Hot Key (CTRL-ALT-)
Sets a hot key that, when pressed, locks the keyboard until the User password is entered. The
Keyboard LEDs flash to indicate that the keyboard is locked. When you enter the User password,
you do not have to press the <Enter> key.
3.12.13 Exit Screen
This section describes the different ways to exit and save or not save changes made in the Setup
program.
3.12.13.1 Exit Saving Changes
Saves the changes to CMOS RAM and exits the Setup program. You can also press the <F10> key
anywhere in the Setup program to do this.
3.12.13.2 Exit Discarding Changes
Exits the Setup program without saving any changes. This means that any changes made while in
the Setup program are discarded and NOT SAVED. Pressing the <Esc> key in any of the four
main screens will do this.