English
nPATA IDE Set to
Options: | Ch.0 Master/Slave, Ch.1 Master/Slave (default:Ch.0 Master/Slave ) |
nSATA Port 0/2 Set to
This value depends on the settings of
nUSB Controller
Allows the user to enable or disable the onboard USB controller. (default:Enabled)
nUSB 2.0 Controller
Allows the user to enable or disable the onboard USB2.0 (default:Enabled)
nUSB Keyboard Support
Allows user to use a
nUSB Mouse Support
Allows user to use a
nAC97 Audio
Allows the user to use the onboard AC97 audio (default:Auto)
nOnboard H/W LAN
Allows the user to enable or disable the onboard LAN (default:Enabled)
nOnBoard LAN Boot ROM
Allows user to enable or disable booting from a network drive (default:Disabled)
nOnboard Serial Port 1
Allows the user to enable or disable the first onboard serial port
Options: | Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4) |
nOnboard Parallel Port
Allows the user to enable or disable the onboard parallel port.
Options: | 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7) |
nParallel Mode
Use this to select the operation mode for the parallel port.
Options: SPP, EPP, ECP, EPP+ECP (default:SPP)
nECP Mode Use DMA
Allows the user to select the ECP Mode Use DMA
Options: 1, 3, Disabled (default:3)
22