Intel XP-P5CM-GV Frequency/Voltage Control, nCPU Clock Ratio, nMemory Frequency For, English

English

Options:	Auto (BIOS autochecks which type of CPU fan is installed and sets the
	optimcal CPU Smart FAN control mode.)
	Voltage (Set this item to Voltage if a 3-pin CPU fan is installed.)
	PWM (Set this item to PWM if a 4-pin CPU fan is installed.)
Note:	In fact, you can set the CPU Smart Fan Control mode to Voltage for either 3-
	pin or 4-pin CPU fan. However, for those 4-pin CPU fans that are not
	designed following Intel's 4-wire fans PWM control specifications, setting
	the CPU Smart Fan Control mode to PWM may not effectively reduce the CPU
	fan speed.

3.8.Frequency/Voltage Control

øThis allows user to configure CPU frequency and voltage settings.

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software

Frequency/Voltage Control

CPU Clock Ratio		[15X]				Item Help
Memory Frequency For		[Auto]			Menu Level}
Memory Frequency (Mhz)		266			Set CPU Ratio if CPU
					Ratio is unlocked
higf: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

nCPU Clock Ratio

Allows user to set the CPU Clock Ratio.

If the CPU used locks this feature, then it will not be displayed or will not function. (based on CPU type)

nMemory Frequency For

for FSB(Front Side Bus) frequency=533MHz,

2.50Memory Frequency = Host clock X 2.50.

3.00Memory Frequency = Host clock X 3.00.

4.00Memory Frequency = Host clock X 4.00.

Auto Set Memory frequency by DRAM SPD data. for FSB(Front Side Bus) frequency=800MHz,

1.66Memory Frequency = Host clock X 1.66.

2.00Memory Frequency = Host clock X 2.00.

2.66Memory Frequency = Host clock X 2.66.

Auto Set Memory frequency by DRAM SPD data.

nMemory Frequency (Mhz)

The memory frequency is based on the " Memory Frequency For" setting.

26