Intelligent Motion Systems MDrive23 manual MDRIVE23 MICROSTEPPING - OPTIONS, Order Information

MDRIVE23 MICROSTEPPING – OPTIONS

Control Knob

The MDrive23 is available with a factory-mounted rear control knob for manual shaft positioning.

Planetary Gearbox

Efficient, low maintenance Planetary Gearbox are of- fered assembled with the MDrive23. Details inside.

Encoder

The MDrive23 is available with a factory-mounted optical encoder. Available line counts are 100, 200, 250, 400, 500, 1000 or 2000. All encoders, except 1000 line, have an index mark. Encoders are avail- able in both single-end and differential configurations. Order optional Encoder Cables separately:

Single-end Cable (12"/30.5cm) ... ES-CABLE-2* Differential Cable (36"/91.5cm)... ED-CABLE-2*

*Change "2" to a "6" when ordering 2000 line encoder cable.

Linear Actuator

The MDrive23 with long life Acme Screw Linear Ac- tuator is available with the following travel/full step:

Screw F	0.002”/full step
Screw A	0.001”/full step
Screw B	0.0008333”/full step

Screw C	0.0005”/full step
Screw D	0.0004167”/full step
Screw E	0.0003125”/full step

Standard screw length is 6.0” (152.4mm) plus the mounting end thread. Custom lengths from 2.0” to 24.0” are available without mounting end thread.

Linear Actuators are Non-Captive style. Contact the factory regarding Captive Shaft or External styles.

Parameter Setup Cable and Adapter

The optional 6' (1.8m) Parameter Setup Cable Part No. MD-CC100-000 eliminates the need to wire com- munications and is recommended with first order. It connects an MDrive's 10 pin pin-header (P2) to a standard DB-25 PC Parallel/SPI port and includes built-in logic level shifting circuity to accommodate the 3.3v ports on some PCs. In addition, MDrives with C Connector require an Adapter Part No. MD-ADP- 1723C to mate the Cable to the 12 position pin and receptacle connector (P1).

Prototype Development Cable

For testing and development of MDrives with C Con- nector, the 12" (30.5cm) Prototype Development Cable plugs into the MD-ADP-1723C Adapter and has flying leads for connection to the user interface. Part No. ADP-3512-FL.

ORDER INFORMATION

MDRIVE23 MICROSTEPPING

Stack Sizes

18†= Single Stack & Linear Actuator

22 = Double Stack

31 = Triple Stack

MDM		22	–		OPTION
Interface Options			Input Voltage
C = Pin & Receptacle*			4 = 48	VDC
F = 12" Flying Leads			7 = 75	VDC*
P = Pluggable Clamp
	Type Terminal Strip

Example #1: Part Number MDMC2222-4 is an MDrive23

Microstepping with C Connector, NEMA 22 motor, stack size 22 and +12 to +48 VDC input voltage range.

						OPTIONS
Control	N						Example #2: MDMC2222-4N
Knob							Adds a Control Knob
							to the part shown in example #1.
Planetary
	G						Example #3: MDMC2222-4G5
Gearbox							Rounding ratio to the nearest whole number,
	Gearbox Ratio						the above adds a Planetary Gearbox with
							5.18:1 ratio to the part shown in example #1.
	Rounded to Nearest Whole Number
							Add -F if optional NEMA Flange is desired.
Encoder	E						Example #4: MDMC2222-4ED500
							Adds a 500 line count Differential Encoder
	S = Single End		Line Count: 100, 200, 250,				to the part shown in example #1.
	D = Differential	400, 500, 1000, 2000
Linear	L						Example #5: MDMC2218-4LB10.5
Actuator†							MDrive23 Microstepping Linear Actuator
							with a 0.0008333”/Full Step Acme
Screw Type (Travel/Full Step)
F = 0.002”			Custom Screw Length				Screw custom cut to 10.5”.
				Range 2.0” to 24.0”
A = 0.001”							MAY NOT be combined with other options.
B = 0.0008333”					Format XX.X		Note: MDrive23 Linear Actuator
C = 0.0005”			eg. 08.5 for an 8.5” Screw
							Available ONLY in Stack Size 18
D = 0.0004167”		(6.0” Screw Length Standard)
E = 0.0003125”

†Linear Actuator Available ONLY in Stack Size 18. (MDMX2218LX) *MDrive 75 Volt version NOT Available with C Connector Interface Option.

P.O. Box 457, 370 N. Main Street Marlborough, CT 06447 U.S.A.

Phone: 860/295-6102

Fax: 860/295-6107

E-mail: info@imshome.com

Home Page: www.imshome.com

Distributed By:

TECHNICAL SUPPORT	IMS EUROPE GmbH
Eastern U.S.	Hahnstrasse 10, VS-Schwenningen
Phone: 860/295-6102	Germany D-78054
Fax: 860/295-6107	Phone: +49/7720/94138-0
E-mail: etech@imshome.com	Fax: +49/7720/94138-2
Western U.S.	E-mail: info@imseuropehome.com
Phone: 760/966-3162	European Sales Management
Fax: 760/966-3165	4 Quai Des Etroits
E-mail: wtech@imshome.com	69005 Lyon, France
IMS MOTORS DIVISION	Phone: +33/4 7256 5113
	Fax: +33/4 7838 1537
105 Copperwood Way, Suite H	E-mail: bmartinez@imshome.com
Oceanside, CA 92054	German Sales/Technical Support
Phone: 760/966-3162	Phone: +49/35205/4587-8
Fax: 760/966-3165	Fax: +49/35205/4587-9
E-mail: motors@imshome.com	E-mail: hruhland@imshome.com

Product information covered by IMS Product Disclaimer available at www.imshome.com. Visit the IMS web site for the most up-to-date product information.

© 2002, 2004 Intelligent Motion Systems, Inc. All Rights Reserved. REV121704