hardware
Front Panel (compressed view)
Selected | Live | Bank no. |
Port-switching buttons (8-port model shown) 10/100 
Link Power
Rear Panel (compressed view)
Video
Serial port 2 (serial power control/external modem support)
Serial port 1
(console mgmt.)
button
Ethernet port PC ports (8-port model shown)
Power adapter jack | Daisy chain out Local console ports: keyboard, video, mouse |
installation/setup
Digital KVM over IP Switch Setup
1.Plug the included power adapter into the switch and an AC source, then turn on the switch.
2.Set up your local console by connecting a keyboard, monitor and mouse to the corresponding Console (keyboard, video and mouse) ports on the switch (see Rear Panel above). Refer to Appendix A in the user manual for an introduction to basic local console operation.
3.Connect to one or more computers/servers as described below. Refer to Appendix B in the user manual for samples of connector cables, including the recommended
