Connected Computer Setup
1.Turn off the mouse acceleration feature and the “Snap to” option on each of the computers/servers included in the network being configured.
Mouse synchronization can function properly only when these two options are turned off on
all connected computers. For example, in Windows XP/2003, go to Control Panel ‡Mouse Properties
‡ Pointer Options and, in
the Motion panel, set the mouse (pointer) speed at the middle of the bar scale; then uncheck both the “Enhance Pointer Precision” option and, in the Snap To panel, the “Automatically move pointer to the default button in a dialog box” option. (For details, see
the Installation / Server Configuration section in the user manual.
2.Check that the settings/modes for display frequency and pixel dimensions are standard, such as 800 x 600 @ 60/72/75 Hz; 1024 x 768 @ 60/70/75 Hz; or 1280 x 1024 @ 60 Hz.
3.Disable the transitional effect function by going to Control Panel ‡ Display ‡Appearance ‡Effects and unchecking the option. Doing this will significantly improve the video quality when using Medium or Low as your video filter quality setting.
Switch Configuration for LAN Connection
1.Connect the Digital KVM over IP Switch to your LAN by connecting the Ethernet port of the switch to one of the LAN ports on your network switch/hub within your LAN using a Cat5 UTP cable. The Link LED on the front panel of the switch lights to indicate 10 Mbps Ethernet
