![](/images/new-backgrounds/1193558/19355839x1.webp)
set the access point to “Repeater mode”. Simply speaking, “Repeater mode” function is the combination of “AP mode” and “PMP mode”.
Parameter | Description |
Parent MAC Address | You have to enter the MAC addresses of other access points that join the |
| bridging work. |
Child MAC Address | You have to enter the MAC addresses of other access points that join the |
| bridging work. |
Mode | 802.11b mode: It allows to select the transmit rate up to 11Mbps |
| 802.11g mode: It allows to select the transmit rate up to 54Mbps |
| Mixed mode: It provides best performance for 11g transmission when |
| you enable the AP mode selection to “Mixed mode”. |
Broadcast SSID | It will respond to Broadcast SSID requests. If you enable this function, |
| every wireless station located within the coverage of this access point |