Intellinet Network Solutions 802.11G 3.2.12 LAN Setup

3.2.12 LAN Setup

Parameter Description

Device Name It shows current FW version.

Automatic IP Selecting this option is not advised unless you have direct access to the

device that provides the IP address.

Fixed IP Specify IP: Designate the Access Point’s IP Address. This IP Address

should be unique in your network. The default IP Address is 192.168.2.1.

Subnet Mask: Specify a Subnet Mask for your LAN segment. Gateway:

Specify the default gateway IP of this Access Point.

Click Apply button at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the Access Point.

Contents

Main Table of Contents Charpter 4 Troubleshooting ...................................................................33 Chapter 1 Introduction 1.1 Package Contents 1.2 Features 1.3 Specifications 1.4 Physical Description Front Panel Back Panel Page Chapter 2 Wireless LAN Access Point Connection Chapter 3 Wireless LAN Access Point Configuration 3.1 Getting Started 1b) Windows 2000 6. Click OK to confirm the setting. Your PC will now have the IP Address you 1c) Windows NT Page Page 3.2 Configuring the Access Point 3.2.1 Client Mode configuration Page Channel Security Preamble Type Transmit Rate Site Survey table: 3.2.2 AP Mode configuration Page Channel Security Advance setting Access Filter 3.2.3 Repeater Mode Configuration Page Channel Security Advance setting Access Filter 3.2.4 P2P Mode configuration 3.2.5 PMP Mode Configuration Parameter Description AP MAC Address Mode 802.11b mode: It allows to select the transmit rate up to 11Mbps Channel 3.2.6 WEP Setting Page 3.2.7 WPA Setting 3.2.8 Advanced Setting 3.2.9 Access Filter Page 3.2.10 Status Setup 3.2.11 Admin Setup Page 3.2.12 LAN Setup Chapter4 Troubleshooting