Intermec Technologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. technical and service support: 1.800.755.5505
U.S. media supplies ordering information: 1.800.227.9947
Canadian technical and service support: 1.800.687.7043
Canadian media supplies ordering information: 1.800.267.6936
Outside U.S. and Canada: Contact your local Intermec service
supplier.
The information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and/or service
Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission
of Intermec.
Information and specifications in this manual are subject to change
without notice.
1998 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER,
Antares, Adara, Duratherm, EZBuilder, EasyCoder, Precision Print,
PrintSet, Virtual Wedge, and CrossBar are trademarks of Intermec
Corporation.
Throughout this manual, trademarked names may be used. Rather
than put a trademark ( or ) symbol in every occurrence of a
trademarked name, we state that we are using the names only in an
editorial fashion, and to the benefit of the trademark owner, with no
intention of infringement.
The software contained in the 7421 Printer and the accompanying
materials are copyrighted. Unauthorized copying of the software,
including software that has been modified, merged, or included with
other software, or the written materials is expressly forbidden without
the prior written consent of Intermec. All right, title, and interest in all
copies of this software are and shall at all times remain the sole and
exclusive property of Intermec. Customer may be held legally
responsible for any copyright infringement that is caused or
encouraged by its failure to abide by these terms.