ADJUSTINGAND OPERATING

CLEANING THE MOWER

Clean the underside of the mower at the end of the mowing season and when the buildup of cut material on the underside is noticed.

CAUTION! To prevent an accident or possible injury, always stop the engine, disconnect the spark plug wire, lock the brake, and place the mower clutch control lever in

the disengaged position prior to cleaning or doing any work on the mower.

BLADE

CARE

 

 

~

(:::)

'"

~

a

C)~--~?

 

j3/8.

 

 

l~::~]==r=::::~~~~:-=~========= ::\,

The cutting blades must be kept sharp at all times. The blades can be sharpened on the mower with a few strokes of a file or they can be removed from the mower and sharpened on a grinding wheel.

CAUTION! Be careful not to cut your- self when sharpening the blade or cleaning the underside of the mower.

Cutting edge should be kept at production angle (25 degrees) with bottom of blade to insure maximum cutting efficiency of blades.

NOTE: Sharpen ends evenly so that blades remain balanced. However, if the cutting edge of the blade is within 3/8-inch of the wind wing, it is recom- mended that new blades be installed. New blades are available at your International Harvester dealer.

To detach the blade, place a large wood block between the cutting edge and housing to keep the blade from rotating. Then remove the hex. head capscrews, nuts and washers.

When replacing blades use the reverse procedure, except put the wood block between the wing of the blade and the deck.

HEIGHT OF CUT

Cutting height can be adjusted from approximately

1-1/2-inches to 4-1/4-inches quickly and easily. Depress the release button on top of the lift handle to set the handle in the desired notch of the lift handle quadrant. The quadrant is marked for ease in selecting the desired height of cut.

The height of cut is approximate since operator weight and tire inflation will effect the cutting height.

The cutting blades are designed to create a suction to lift the grassfor an even cut.

The mower extends beyond the driving wheels to permit cutting close to walkways, fences, buildings, trees, etc.

ATTACHING AND DETACHING THE MOWER

To facilitate changing the blades, sharpening the blades, cleaning, etc-, the mower may be detached asfollows:

Place the mower clutch control lever in the "OF F" position. Stop the engine and disconnect the spark plug wire.

1.Disconnect the mower drive belt from the main drive pulley and clutching idler pulley. The belt guide around the main drive pulley is spring hooked for ease in removing the belt.

Be sure blades are assembled so the cutting edges are in the direction of rotation with the wind wings poi nted toward the deck.

2. Position the mower in the lowest position.

9

Page 10 Page 12
Page 11
Image 11
International Home Products Cadet 80 manual Adjustingand Operating, Blade Care, Height of CUT
Page 10 Page 12

Cadet 80 specifications

The International Home Products Cadet 80 is a standout model in the realm of energy-efficient heating solutions. Designed with the modern consumer in mind, this electric wall heater combines functionality, aesthetics, and reliability. Its sleek design allows it to fit seamlessly into any home decor, making it a versatile addition to varied spaces, whether in residential or commercial settings.

One of the primary features of the Cadet 80 is its compact size, which enables it to be installed in tight spaces without compromising performance. The heater's slim profile allows for discreet placement, ensuring that it complements rather than detracts from the room's appearance. With a capacity of 800 watts, this model is ideal for heating small to medium-sized rooms, delivering consistent warmth during colder months.

The Cadet 80 is equipped with advanced technologies that enhance user experience and efficiency. It incorporates an easy-to-use adjustable thermostat that allows homeowners to set their desired temperature with precision. This feature not only maximizes comfort but also contributes to energy savings, as the system can automatically adjust its output based on the room’s heating needs.

Another hallmark of the Cadet 80 is its safety features. The heater includes a built-in overheat protection mechanism, providing peace of mind for users. This feature automatically shuts off the unit if it becomes too hot, preventing potential hazards and ensuring safe operation. Furthermore, the durable, heavy-duty construction of the Cadet 80 ensures longevity, withstanding the rigors of daily use.

Additionally, the easy installation process of the Cadet 80 is worth noting. The unit can be hardwired directly into the electrical system, making it suitable for permanent installation in various settings. This eliminates the need for cumbersome cords and allows for a cleaner aesthetic.

In summary, the International Home Products Cadet 80 electric wall heater stands out for its compact design, efficient heating capacity, user-friendly controls, and emphasis on safety. For those seeking a reliable and stylish heating solution for small to medium rooms, the Cadet 80 presents an excellent choice, merging modern technology with practical features that enhance comfort and convenience.
Top Page Image Contents