International Home Products Cadet 80 manual Attended, Driving the Lawntractor, Lubrication

Models: Cadet 80

1 29
Download 29 pages 27.62 Kb
Page 10
Image 10

DRIVING THE LAWNTRACTOR

ACAUTION! Until you have the feel of

your lawn tractor, go slowly at first, avoid sharp turns at high speed, and on

steep slopes to avoid an upset or loss of control.

A CAUTION! To prevent an accident, always disengage the mower, set the speed control lever in neutral position,

set the parking brake, stop the engine, and remove the ignition key when leaving the machine un-

attended.

An adjustable speed control stop is provided to allow the operator to return to a predetermined speed. The speed control lever can bypass the speed control stop by pushing the lever outward and sliding it past the stop.

Always lock the parking brake when the tractor is parked on a grade. To lock the brake, press down on the clutch-brake pedal and place the clutch- brake pedal in engaged position, as shown. To disengage the lock press down on the pedal, lift the lock up and place it in the disengaged position.

The blade spindle bearings can be relubricated and are carefully enclosed and protected by seals.

LUBRICATION

After every 10 hours of operation lubricate the

two spindles (one fitting in each spindle), using chassis lubricant (pressure gun grease). Only one or

two strokes of the applicator are required.

ADJUSTING THE SEAT

Before starting the tractor, adjust the seat to the most comfortable driving position. To adjust the seat loosen the four bolts holding the seat on the springs and slide the seat forward or back to the

desired position.

If further forward adjustment is desired, remove the four bolts holding the springs to the tractor frame and reset the springs in the four additional forward holes provided.

8

Page 10
Image 10
International Home Products Cadet 80 manual Attended, Driving the Lawntractor, Lubrication, Adjusting the Seat